Luzerne County restaurant inspections: March 25 through March 31

The following are recent Luzerne County restaurant inspection reports from the Pennsylvania Department of Agriculture. According to the agency: “Any inspection is a ‘snapshot’ of the day and time of the inspection. An inspection conducted on any given day may not be representative of the over all, long-term cleanliness of an establishment. Also, at the time of the inspection, violations are recorded but are often corrected on site prior to the inspector leaving the establishment.” The information is taken from the inspection database at www.eatsafepa.com. Postal addresses used here are as listed on the state’s website and may not correspond to the municipalities in which facilities are physically located. Cork Bar and Restaurant, 463 Madison St., Wilkes-Barre: Regular inspection, in compliance. Violations: Wall in the kitchen area has a hole behind freezer and is in need of repair. Taco Bell, 565 Susquehanna Blvd., Hazle Township: Regular inspection, in compliance. Violations: Food employee observed in food prep area wearing watch on wrist. Plastic container holding bagged lettuce and cheese observed on floor of walk-in cooler. Dust observed on walk-in cooler refrigeration unit ...

Watch Metallica’s Lars Ulrich Meet a Heavy Metal Fan With Autism

Ahead of Metallica’s second annual day of service backed by the band’s charitable arm All Within My Hands, a touching clip of drummer Lars Ulrich spending time backstage with a fan with autism, Tom, has appeared online. It’s taken from the 2012 documentary Mission to Lars, a film that tracks heavy metal diehard Tom Spicer’s journey to meet his favorite drummer. Spicer has Fragile X syndrome, a sort of autism or learning disability loosely defined as a genetic condition that causes a range of developmental problems. The video excerpt, captured during the band’s arena tour following Death Magnetic, shows the Metallica fan’s wishes come true as he’s immersed in the musician’s world, rubbing elbows with other players such as Kerry King. “See that guy, he plays in a band called Slayer,” Ulrich directs Spicer’s attention to the guitarist at one point in the short section of the film. “This is Tom, he came all the way from England to see Metallica.” Below, watch the Mission to Lars clip that was recently re-shared on YouTube, the moving segment serving to remind all of us that music’s communicative powe...

The magical multitool machine gets upgraded with the ZMorph VX. Review the specs on this 3-in-1

The magical multitool machine gets upgraded with the ZMorph VX. Review the specs on this 3-in-1 3D printer, CNC mill, and laser engraver. Are you ready for the next generation of multitool 3D printer? Is the world even ready? Nobody knows for sure, but Polish company ZMorph says to hell with the consequences. They’ve gone ahead and announced their new multitool machine, the ZMorph VX. ZMorph already has a solid reputation for their versatile 3D printers; we had a decent experience with the ZMorph SX not so long ago. Their point of distinction is being able to offer multiple fabrication methods within the one desktop machine. And thanks to their modular design of detachable heads, a ZMorph machine can work with dozens of available fabrication materials. More than enough to satisfy even the most demanding professional designers, engineers, and educators. The next generation model, the ZMorph VX, boasts advanced solutions in print quality and machine reliability. The company promises that the machine is easier to set up and operate than ever before. In addition, there’s a flexible pricing system for those who want to pick and choose the feature-set for their custom requirements. I...

Luxury homes: $3M PV mansion has ornate stone lap pool

Guest houses, sport courts and five-car garages are among the luxurious features in this week’s priciest home sales in metro Phoenix. This conversation is moderated according to USA TODAY’s community rules. Please read the rules before joining the discussion. Bryan Mitchell and his wife Dana paid through their trust for this 9,550-square-foot Paradise Valley home in Collice Portnoff Estates.(Photo: StreetScout.com) Guest houses, sport courts and five-car garages are among the luxurious features in this week’s priciest home sales in metro Phoenix. David McHale, executive vice president of Northeast Utilities, and his wife, Shannon, purchased this mansion in Scottsdale’s Mirabel Club community. The 6,387-square-foot contemporary-style mansion has four bedrooms, six baths and sits on the 17th fairway of the Mirabel Golf Club golf course. The designer kitchen is a chef’s dream, with Bulthaup custom cabinetry, Caesarstone countertops and top of the line Miele stainless steel appliances. The house is fitted with luxury sliding pocket doors and three Basalt linear fireplaces. The master bath is reminiscent of a private spa, with European-style dual rain s...

Constellium supplies Groupe PSA with aluminium Auto Body Sheet and Crash Management Systems for commercial and passenger cars NYSE:CSTM

AMSTERDAM, The Netherlands, May 21, 2019 (GLOBE NEWSWIRE) — Constellium N.V. (NYSE:CSTM) announced today that it is the supplier of aluminium Auto Body Sheet for the hood of Groupe PSA’s New PEUGEOT Partner and New Citroën Berlingo Van, International Vans of the Year 2019, as well as for the new Berlingo (awarded “best buy Car of Europe 2019” by AutoBest) and the New PEUGEOT Rifter. While Groupe PSA frequently uses aluminium in passenger cars, this is the first time it is using aluminium Auto Body Sheet for its light commercial vehicles. This marks an important step in the development of Constellium’s close, long-term collaboration with Groupe PSA which covers a comprehensive range of vehicles from compact city cars to commercial vans. Constellium provides Surfalex® for the outer hood panels, a material developed to meet stringent requirements for high surface quality with specific hemming and roping properties. For the inner hood, Constellium delivers a material solution with superior formability and mechanical resistance that enables efficient processing of complex geometries on the customer’s equipment. Constellium also supplies the front Crash Management System for th...

While most of what we hear from SRAM involves singing the praises of wide range cassettes

While most of what we hear from SRAM involves singing the praises of wide range cassettes and 12 gears, there’s a group of riders for whom getting up hills is of no interest whatsoever. We speak of course of the Downhill scene. If George Thompson’s regular race reports are anything to go by, there are plenty of breakages, so perhaps justifying the purchase of one of these new XO1 DH products from SRAM will not be too difficult. No, there’s no DH Eagle 12 speed option (we should totally do that for next year’s April Fool though…), but the SRAM XO1 DH brings high end 7-speed shifting to the party. Mated with the recent DUB bottom bracket for SRAM’s claimed longer lasting seals and light weight, the XO1 promises improved chain retention and an abrasion guard on the crank arm to keep things looking good. Which will be important, because if you’re riding these you’re probably eying up the podium, and you want you and your bike to look their best for all those photos, right? For the back end of the bike, there’s a new XG-795 Mini Block Cassette, which promises optimised gear steps of 10-24 with two-tooth steps so there’s no need for double or triple shifts. It’s compatible with any XD...

Fiber Converter Market 2019: Emerging Technologies, Sales Revenue, Key Players Analysis, Development Status, Opportunity Assessment and Industry Expansion Strategies 2025

The research report on Fiber Converter focusses on Vital dynamics of Fiber Converter Market. The prospective of the Fiber Converter Industry has been explored along with the major challenges faced by the market. The current Fiber Converter Market scenarios and future prospects of the industry has also been considered in the Market report. The market report begins with Fiber Converter Introduction, product scope, market overview, market opportunities, market risk, and market driving force. The market report provides top manufacturers sales, revenue, and price of Fiber Converter, in 2018 and 2019 followed by regional and country wise analysis of sales, revenue and market share for the Fiber Converter.                                           Get Sample PDF of Report This report studies the Fiber Converter market; the fiber media converter is a simple networking device that makes it possible to connect two dissimilar media types such as twisted pair with fiber optic cabling. They were introduced to the industry in the 1990s, and are important in interconnecting fiber optic cabling-based systems with existing copper-based, structured cabling systems. They are also used in metropoli...

How Tough Mudder comes up with its evil obstacles Telegraph logo Feed of articles Saved articles Save Facebook icon Twitter icon Instagram icon LinkedIn icon Facebook icon Twitter icon Instagram icon LinkedIn icon

If, like me, you’ve struggled around a Tough Mudder course, you’ve probably wondered who would create such evil and torturous obstacles. I know I did, as my whole body was  dunked in ice cold water, then electrocuted, then made to crawl under barbed wire. What diabolical madman could come up with a slide that goes through fire? Or a tent full of nerve gas? The 31-year-old product manager is one of the brains behind Tough Mudder’s gruelling half-marathon obstacle courses. With a new raft of challenges announced for 2016, Nathan told The Telegraph about the nefarious tests that competitors can look forward to this year. “We are focusing on one called Block Ness Monster,” he said. This forces competitors to use teamwork to hoist each other over a series of rotating blocks in waist-deep water. The blocks are also on bungee cords, so if you’re standing on one and your team let go, you might get a bird’s eye view of the whole course. “An intern came up with an idea involving balancing boards across water, and if people behind you step on the board too, you could fall in. “But when we tested it, we found it was much more fun to climb over a block while it was in water, so ...

Scottish rockers Franz Ferdinand to play College Street Music Hall Aug. 8

NEW HAVEN — Intent on keeping the danceable vibes cerebral, Scottish four-piece band Franz Ferdinand ascend College Street Music Hall’s stage Aug. 8 with their subversive blend of funk and alt-rock. Franz Ferdinand cracked the U.S. Billboard Hot 100 chart in 2004 with their single “Take Me Out,” from their self-titled debut LP. Playful and slinky, with lyrics that invoke pulp spy films, “Take Me Out” was buoyed by the thumping bass and scratchy guitar riffs that epitomized the early-2000s alternative rock boom. In addition to becoming an instant staple on alternative radio, Franz Ferdinand received rave reviews from both the mainstream music press and more independent outlets like Pitchfork and Uncut. “For all their influences,” said a review of Franz Ferdinand’s first record from UK rock mag Uncut, “their voice is uniquely, gently mad.” A much-discussed article from Rolling Stone magazine in 2010, their infamous “500 Greatest Songs of All-Time” list, even included “Take Me Out” at No. 327, saying “‘Take Me Out’ puts Franz Ferdinand at the head of a danceable rockwave.” Franz Ferdinand is one of the rare acts from the 2000s to make an appearance on Rolling Stone’s list. Four al...

8 Best Latte and Cappuccino Machines (2019): Breville, Mr. Coffee, and More

A good latte or cappuccino is like a rich milky mug of heaven. Just writing about these delicious, warming drinks makes me want one. Sadly, creating the perfect cap or latte at home can be a hassle. Making a barista-worthy espresso is tough enough, but adding the right amount of milk and foam, perfectly heated and combined, is surprisingly daunting. In mid-2018, I dove headfirst into the world of advanced coffee devices and find out what makes them tick … er … hiss. I’ve tried more than a dozen machines with latte and cappuccino functionality. Some machines made pure espresso using coffee-shop-style portafilters and came with milk canisters for frothing. Others relied on single-use pods with separate foamers. A few even came with legit steam wands and advanced options. These are the best latte and cappuccino machines I’ve found so far. Updated Dec. 2018: Fellow Gear writer Adrienne So and I have prepped this guide for 2019, with two new top picks, the Mr. Coffee One-Touch Coffeehouse, and Breville Bambino Plus. Be sure to read our many other holiday guides. You can also get an ad-free, unlimited version of WIRED for $5 (and 12 months of our magazine). Your support he...

When you buy something using the retail links in our stories, we may earn a small

When you buy something using the retail links in our stories, we may earn a small commission. Outside does not accept money for editorial gear reviews. Read more about our policy. These hand-blown tumblers feature a tiny rendering of Yosemite’s Half Dome. Whiskey Peaks also has versions of these glasses for Everest, Mount Fuji, Denali, and other iconic peaks. The set of two makes a classy addition to any home bar. Made in Santa Fe, New Mexico, this knife features a burly 16-layer Damascus steel blade. The handle has polished ironwood throughout, with inlaid Sonoran Turquoise to give it a unique and stylish look. This hybrid shoe is made for the professional angler who needs an outsole that grips when wet, an upper that resists stains, and an overall design that performs when the excitement hits. We featured these slippers in our 2017 Summer Buyer’s Guide. The braided and tanned water buffalo upper stays true to its heritage roots in India, but the goat-leather lining and natural rubber outsole deliver a much needed dose of modern comfort: “The City molded to our feet for a truly custom fit,” our tester writes. We’ve been raving about how the TRX can provide one of the mos...

Know about Photo Cell Market growth in New Research 2019 and Know about its Top growing factors by Key Companies like SELC, Unitech, Tdc Power, Digisemi & Technology, Standard Equipment

Photo Cell market research is an intelligence report with meticulous efforts undertaken to study the right and valuable information. The data which has been looked upon is done considering both, the existing top players and the upcoming competitors. Business strategies of the key players and the new entering market industries are studied in detail. Well explained SWOT analysis, revenue share and contact information are shared in this report analysis. New Research study on Photo Cell Market throws light on the crucial trends and dynamics impacting the development of the market, including the restraints, drivers, and opportunities. A number of analysis tools such as Porter’s five forces analysis and SWOT analysis have been employed to provide an accurate understanding of this market. Companies Profiled in this Report includes, SELC, Unitech, Tdc Power, Digisemi & Technology, Standard Equipment RL series For the purpose of the study, Global Photo Cell market is segmented based on various parameters. An in-depth regional classification of the market is also included herein. The factors which are impacting the market’s growth are studied in detail. The report also presents a rou...

1234 Next > >> Page 1 / 4